en-us Installation procedure
Installation above a cabinet door
A
min. ¾" (19 mm)
max. 2" (50 mm)
B
5⅞" (150 mm)
C
2¾" (70 mm)
D
min. 0" (0 mm)
E
2⅜" (60)
F
min. ⅜" (10 mm)
G
min. 1" (25)
4 Installation procedure
Installation procedure
Follow these instructions to install the cooktop into the
Installation procedure
countertop.
CAUTION
Sharp edges.
Use protective gloves when installing the appliance.
▶
CAUTION
The appliance is heavy.
It is recommended that two people install this appliance.
▶
4.1 Preparing the cooktop
Place the cooktop face down on a soft and stable sur-
1.
face. Use the foam sheet from the packaging to protect
surfaces from scratching.
10
Apply the included foam sealing tape around the edges
2.
of the underside of the appliance.
Attach the hold-down brackets to the underside of the
3.
cooktop with the provided short screws. Loosely tighten
the screws so the clamps do not move freely. Rotate
the hold-down brackets so that the appliance can be
placed in the cutout.
4.2 Installing the pressure regulator
WARNING
Do not attempt any adjustment of the pressure regulator,
except when converting to propane. Adjustments could
lead to leaks or cause incorrect gas pressure to the appli-
ance.
Make sure the used gas connection line is not connected
to the gas supply, before carrying out the following steps.
Note: All pipe connections must be sealed in accordance
with local codes.