Herschel HS500PR Instrucciones De Instalación Y Funcionamiento página 3

CAUTION
Any fixed mains wiring outside the heater coming into contact with the heater must be protected by sleeving with
a temperature rating of at least 90°c.
Ensure that the power cable is not coiled. DO NOT attach excess mains cable to any part of the heater.
DO NOT
drill through the heater as this will cause irreparable damage and is also dangerous.
DO NOT
connect a heater that is damaged in any manner to the power network.
For mounting the Herschel heater use the supplied feet only and install in accordance with this installation
guide.
WATER INGRESS PROTECTION IP20
Herschel Select Portable Infrared Panel Heaters are rated to a standard (minimum IP20).
the immediate surroundings of a bath, shower or where the unit can be splashed. It must not be possible for the
switches on the heater to be operable by anyone in a bath or shower. It must not be possible for the heater to be
moved or knocked so as to fall into a bathtub, shower, swimming pool or other water container.
the mains cable to rest in water.
Herschel Infrared Ltd shall not be liable for any loss, damage or injury caused or resulting from inadequate fitting
or incorrect placement of heaters close to water sources.
SAVE THESE INSTRUCTIONS.
5 YEAR WARRANTY
Register your product here https://www.herschel-infrared.co.uk/customer-service/warranty-registration/.
Within five years from date of purchase Herschel will repair or replace the heater where the fault is due to defects
in materials or workmanship. This warranty is for standard domestic use only and excludes commercial uses. In the
event of a warranty claim please visit the Customer Service area of the Herschel Website and follow the Warranty
Claim process. You will need proof of purchase and photographs of the heater.
A prerequisite for validity of the warranty is use at the specified supply voltage of the heater and use in accordance
with the conditions specified in this manual. Any further warranty or claims are excluded.
The warranty covers the repair or replacement of the defective product only and Herschel shall have no liability
for installation costs or consequential loses however incurred. The decision to repair or replace will rest solely with
Herschel and any replacement will be as close as possible in specification to the failed heater.
Removing the serial number will void the warranty. The warranty will also be void if the heater has been tampered
with or opened in any way.
The product power label must be left on the panel.
Herschel Infrared Ltd will assume no responsibility for scratches on surface or frames after first use.
Select Portable Infrared Panel Heater
ENGLISH
DO NOT
place within
DO NOT
allow