Herschel HS500PR Instrucciones De Instalación Y Funcionamiento página 6

Operation
Heat to a fixed temperature with the built-in thermostat on the receiver
The heater can be simply operated by switching it on at the wall and setting a fixed temperature on the SMART-R
receiver.
ECODESIGN Notice:
When used in this simple operating mode, the Select Portable Infrared Panel Heater should only be used in well
insulated spaces for occasional use and should not be left operating permanently switched on.
Operation
Pull the thermostat (8) gently out from the bottom of the SMART-R box until it stops.
Switch the mains socket ON.
Switch the Power Switch (9) on ('I' position on rocker switch) and ensure it illuminates RED.
The heater will warm up until it senses the default local temperature of 37°C is reached at which point it will
switch off.
You can lower the set temperature using the – button on the side of the SMART-R receiver. You can only raise the
temperature (using the + button) to 37 °C.
Heater control using the Smartlife App
The Select Portable Infrared Panel Heater can be more comprehensively controlled using the SmartLife App. This
allows you to set a heating schedule including an AWAY (Holiday) mode and enables voice control via Alexa or
Google Assistant.
ECODESIGN Notice:
When used with the SmartLife App, the Select Portable Infrared Panel Heater is fully ECODESIGN compliant and
can be permanently set up and left switched on.
Downloading & Installing the Smartlife App
Scan the QR code below to download the Smartlife App from the App Store or Google Play.
Alternatively, search "Smart Life" on Google Play or the App Store & look for this icon.
After installing and opening the Smartlife App, you must register an account using an email address and password
and accept the terms of use.
Before starting pairing, please ensure:
- Your mobile phone is connected to the 2.4GHz wifi signal from your router. Some routers also issue a 5GHz
signal, so be sure to select the 2.4GHz option.
- Switch off "Wifi Assist" (IoS phones). You can switch it back on after pairing.
- Be sure to be connected to your main router and ensure your heater is within range of your router.
Select Portable Infrared Panel Heater
ENGLISH