sunjoe SPX-ACS-MAX Manual De Instrucciones página 4

Idiomas disponibles

ROTARY WASH BRUSH ASSEMBLY QUICK GUIDE

NOTE: Below instructions are only for connecting with SUN JOE

corresponding transfer adapter. Check page 2 for details.

SPX200/SPX1000 Series

Trigger Gun

SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT

Trigger Gun

Most SPX2000 Series + SPX4003-ELT, SPX7001E

Trigger Gun

Most SPX3000 Series + Most SPX4000 Series

Trigger Gun

FOR USE WITH SPX200/SPX1000 SERIES:

1. Disconnect your spray wand assembly so that only the middle wand remains attached to your trigger gun.

2. Take the rotary wash brush and align with the middle wand.

3. Once aligned, push the rotary wash brush into the middle wand and twist to lock into place (follow the arrow in the image).

FOR USE WITH SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT:

1. If not already done, detach your spray wand from your trigger gun.

2. Take the rotary wash brush and align with the inside of the trigger gun.

3. Once aligned, push the rotary brush into the trigger gun and twist to lock into place (follow the arrow in the image).

FOR USE WITH MOST SPX2000 SERIES + SPX4003-ELT, SPX7001E:

1. If not already done, detach your spray wand from your trigger gun.

2. Take the rotary wash brush and align the with the inside of the trigger gun.

3. Once aligned, push the rotary brush into the trigger gun and twist to lock into place (follow the arrow in the image).

FOR USE WITH SPX3000 SERIES+ Most SPX4000 SERIES:

1. If not already done, detach your spray wand from your trigger gun.

2. Attach the transfer adapter to your trigger gun.

3. Take the rotary wash brush and align with your trigger gun.

4. Once aligned, push the rotary brush into the transfer adapter and twist to lock into place (follow the arrow in the image).

Pressure Washers. For connecting with other brands' pressure washers, use

Middle Wand

Metal Gun Transfer Adapter

Rotary brush