Publicidad
Idiomas disponibles
Idiomas disponibles
EMPTING THE TANK
WARNING!
To reduce the risk of injury from accidental starting, unplug power cord before emptying
the dust tank.
1. Remove the power head assembly of the wet/dry vacuum by pulling outward on the lid
clips located on each side of the vacuum. Lift off the power head assembly.
2. Dump the tank contents into the proper waste disposal container.
3. Liquids may be emptied through the tank drain. To empty,
turn the Unit off and remove the plug from the wall outlet.
Remove the drain cap and deposit the liquid waste conents
in a suitable drain. After tank is empty, return the drain cap
to its original position. To continue use, plug the cord into
the wall outlet and turn the unit on.
BLOWING OPERATION
WARNING!
Always wear safety eyewear complying with ANSI Z87.1 (or in Canada CSA Z94.3)
when using as a blower.
WARNING!
To avoid injury to bystanders, keep them clear of blowing debris.
CAUTION
Wear a dust mask if blowing creates dust which might be inhaled.
CAUTION
To reduce the risk of hearing damage, wear ear protectors when using the vac/blower
for extended hours or or in confined space.
The vacuum contains a blowing feature. Follow the steps below to use the vacuum
as a blower.
1. Locate blowing port on the vacuum.
2. Insert one end of the 10 ft x 2-1/2 in / 3.0 m x 64 mm hose into the blower port.
3. Turn the vacuum "ON".
8
Publicidad
