Publicidad
Idiomas disponibles
Idiomas disponibles
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
AUTO DRY -
Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control. Choose Normal to save energy.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE:
If loads do not seem as dry as you would like, select More next time you dry a similar load. If loads seem drier than you like, select Less next
time you dry a similar load.
Not all cycles and settings are available on all models.
TIME DRY -
Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle knob
or be a separate control.
Items to dry:
Cycle:
Any load
Time Dry
Rubber, plastic, heat
Air Only
sensitive fabrics
Any load
Touch up
Jeans, heavy work
Time Dry
clothes, towels
If your dryer has multiple temp settings:
A High Cotton temp setting may be used for drying heavyweight items such as towels and work clothes.
A Low Delicates or Medium Casual temp setting may be used for drying medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no temp (Air Only) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.
6
All manuals and user guides at all-guides.com
CYCLE GUIDE-AUTO DRY CYCLES
Dry
Dryness
Temp:
Level:
High Cotton
More
Normal
Less
Medium Casual
More
Normal
Less
Low Delicates
More
Normal
Less
CYCLE GUIDE-TIME DRY CYCLES
Dry
Temp:
Any
No heat (Air Only)
Any
High
Setting the Drying Temperature
Available
Options:
Automatic cycles give the best drying in the
Wrinkle Guard™
Signal
shortest time. Drying time varies based on fabric
Dry Temp
type, load size, and dryness setting.
Select a drying temperature based on the fabrics
Wrinkle Guard™
in your load. If you are unsure of the temperature
Signal
to select for a load, select the lower setting rather
Dry Temp
than the higher setting.
Wrinkle Guard™
Signal
Dry Temp
Available
Options:
Dry Temp
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
Time Adjustment
temperature to select for a load, select the
lower setting rather than the higher setting.
Time Adjustment
Use a no heat (Air Only) setting for foam,
rubber, plastic, or heat-sensitive fabrics.
This is the last step in a cycle that uses
N/A
heat. The load is cooled slowly to reduce
wrinkling and make it easier to handle.
Use this cycle to smooth wear or packing
wrinkles.
Use high temp cycle on heavy cotton loads.
N/A
Cycle Details:
Cycle Details:
Publicidad
