Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Select the desired cycle
OFF
40 min
Wrinkle Guard
Auto Moisture
Sensing
Less
Normal
More
OFF
Select the desired cycle for your load. See the "Cycle Guide"
for more information about each cycle.
Auto Dry Cycles
You can select a different dry level, depending on your load,
by turning the knob to More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dry level
is set, it cannot be changed without stopping the cycle.
Auto Dry cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and dryness
setting.
NOTE: More Dry removes more load moisture. Normal Dry is
used for a starting point for Auto Dry cycles. Choose normal to
save energy. Less Dry removes less moisture and used for loads
you may want to put on a hanger to complete drying.
4.
Set cycle options (on some models)
Off
On
WRINKLE GUARD
Select the cycle options by turning the knob to the desired
position.
NOTE: Not all options and settings are available with all cycles.
Wrinkle Guard™ feature
Get up to 40 minutes of heat-free, periodic tumbling at the
n
end of a cycle. Turn the WRINKLE GUARD™ knob to select
ON or OFF at any time before the cycle has ended.
Dry Temp
Turn the DRY TEMP knob to change the drying temperature
setting. See "Setting the Drying Temperature".
8
All manuals and user guides at all-guides.com
70 60
Time Dry
50
40
30
20
Touch Up
10
OFF
30
10 20
Air Only
Medium
Casual
Low
High
Delicates
Cotton
DRY TEMP
5.
Select Signal, if desired (on some models)
Off
PUSH to START
Turn the SIGNAL knob to select the desired setting (On or Off).
The Signal produces an audible sound when the drying cycle
is finished. Promptly removing clothes at the end of the cycle
reduces wrinkling.
NOTE: When the Wrinkle Guard™ setting is selected and the
Signal is on, the tone will sound every 5 minutes until the clothes
are removed, or the Wrinkle Guard™ setting ends.
6.
Press and Hold START to begin cycle
SIGNAL
Off
On
PUSH to START
Press and hold the START (or PUSH to START on some models)
button to begin the cycle.
Promptly remove garments after cycle has completed to
reduce wrinkling. Use the Wrinkle Guard™ feature to avoid
wrinkling when you are unable to remove a load from the dryer
as soon as it stops.
SIGNAL
On
Publicidad
