Publicidad
Idiomas disponibles
Idiomas disponibles
When operating the wet and dry vacuum cleaner, plan
pauses and avoid operating it for long periods of time.
Permanent vibrations are harmful to health.
The control and safety devices installed must not be
removed or inhibited.
To avoid accidents, you should also take into consideration
the following precautions and procedures:
▪ When operating the vacuum cleaner, adopt a stable
position and always keep your balance. Hold the
appliance firmly to ensure continuous operation and
withstand unexpected situations;
▪ Make sure that the ventilation slots are not clogged. Do
not place any objects over the slots.
Before
performing
cleaning,
changing, repairing and maintenance tasks, you must
remove the battery.
Replace worn out or damaged parts immediately, so that
the power tool is always in a safe operating condition.
Cleaning:
Always keep the power tool clean and dry, free from oil or
grease. Clean all appliance components and attachments
after each use.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out. All other works must be
performed by an official distributor.
Keep all bolts and nuts well tightened in order to ensure a
safe operation.
If any components or safety devices are removed for
maintenance
works,
immediately and correctly.
Use only VITO-approved tools for this machine or
technically identical parts. Failure to do so may result in
personal injuries or damages to the wet and dry vacuum
cleaner. If in doubt, if you lack knowledge or resources, you
should contact an official distributor.
adjusting,
accessories
they
must
be
repositioned
The wet and dry vacuum cleaner should only be serviced by
the brand's technical assistance center, or other qualified
personnel, replacing any necessary parts with original
ones.
Publicidad
