Publicidad
Idiomas disponibles
Idiomas disponibles
Make sure the tank (8) is completely empty before
you switch on the appliance.
1. Insert the battery;
2. Attach the suction attachment for liquids or dust and
solids according to the waste to be vacuumed;
3. Set the "ON/OFF" switch to position (I). If the suction
power is not enough, set the "ON/OFF" switch to position
(II) to increase the suction power and airflow.
To switch off the vacuum cleaner:
4. Set the "ON/OFF" switch to position (0) and remove the
battery. Always switch off the vacuum cleaner before
removing the battery.
1. Fit the floor nozzle (9) and position it according to the
type of floor you are going to vacuum;
2. Keep the HEPA filter placed inside the appliance.
1. Fit the floor nozzle (9) and position it according to the
type of floor you are going to vacuum;
2. Keep the HEPA filter placed inside the appliance.
Whenever the tank is full, stop the vacuum cleaner and
empty.
When vacuuming dust or solid waste:
1. Switch off the vacuum cleaner and remove the battery;
2. Undo the fastening latches and remove the vacuum
cleaner head;
3. Remove the HEPA filter.
4. Pour the tank waste into a bag or box for disposal;
5. Once empty, place the filter bag;
6. Refit the vacuum cleaner head and switch it on again.
When vacuuming liquids:
1. Switch off the vacuum cleaner and remove the battery;
2. Undo the fastening latches and remove the vacuum
cleaner head;
3. Empty the waste into a container;
4. Refit the vacuum cleaner head and switch it on again.
Publicidad
