EGO ZT4200E-S Manual De Instrucciones página 38

EN
LCD
Description
Display
The icon of a certain
battery compartment
blinks.
The icon of the empty
battery compartment
blinks
The overload indicator
blinks
38
ZERO TURN RIDE-ON MOWER — ZT4200E-S
Fault
Mower
Code
Status Beeper
on
Indicator
LCD
n/a OFF No
n/a OFF No
Flashes
n/a One beep
red
Cause Solution
No action is needed.
The mower can
continue working if
the combined battery
A certain Ah rating, over-current
battery during battery excluded, meets
discharging is the requirement. Once
over-current. the over-current battery
returns to normal, it will
join in powering the
mower immediately and
the icon will disappear.
In order to start this
mower, use enough
Battery capacity EGO batteries following
is not sufficient to the instructions in
allow the mower section "ATTACHING/
to work. DETACHING THE
BATTERY PACK" in this
manual.
Raise the deck cutting
The blade motor height or slow the
is overloaded. driving speed to reduce
the load of the mower.
The side
Clean the side
discharge chute
discharge chute after
is clogged with
each use.
grass and debris.
There is an
interference
Call EGO Customer
between the
Service Center
blade and the
mower deck.