SEWMAQ SW-500 Manual De Instrucciones página 2

:fl,
User manual for the portable blind stitch machine model SW-500
Contents
1. General safety rules
2. Construction of the machi ne
3. Set the machina at work place
A. Location
B. lnstallation of the thread rack
C. Connecting the foot pedal
D. lnstallation of the knee lifter
4. Lubrication
5. Needles and threads
6. Needle exchange
7. Sewing machina
8. lnserting the material and start of sewing
9. Thread tension adjustment
1 O. Stitch length adjustment
11. Needle penetration depth adjustment
12. Removing material from.the machina
13. Skip stitch apparatus
Portable bl\nd s titch machine SEWMAQ model SW-500
is a sewing machina designed for woven and knitted fabrics. Machine should not be used for purposes other than those to
which it was intended.
Failure to follow the above rule may be dangerous and may cause permanent damage to the machina.
MODEL: SW-500
Voltage 230V 50/60Hz
Noise leve 1: 41 dB(A)
Vibration 0,2 m/sec2
Sewing speed 1200 stitches./min.
Net welght 11 kg
Measurements in the box550 x 250 x 650 mm
IMPORTANTI
This manual contains important instructions on how to safely, effectively and economically use the machina. Adherence to its
instructions will help avoid danger, reduce stoppage time, improve reliability and durability of the machina. The manual must
always be available at the workplace.
Supplier shall not be liable for damages resulting from improper use or misuse of the service.
ATTENTION:
Ali works relatad to electrical installation must be performed by qualified electrician.
Fo\low the current electrical and safety standards.
EN
J
,·\
· '·' .. · •'
1