Publicidad
Idiomas disponibles
Idiomas disponibles
2. SPECIFIC WARNINGS & SAFETY RULES
2.1 TACKER SAFETY WARNINGS
Always assume that the tool contains fasteners.
Careless handling of the tacker can result in
unexpected firing of fasteners and personal injury.
Do not point the tool towards yourself or anyone
nearby. Unexpected triggering will discharge the
fastener causing an injury.
Do not actuate the tool unless the tool is placed
firmly against the workpiece. If the tool is not in
contact with the workpiece, the fastener may be
deflected away from your target.
Disconnect the tool from the power source when
the fastener jams in the tool. While removing a
jammed fastener, the tacker may be accidentally
activated if it is plugged in.
Use caution while removing a jammed fastener.
The mechanism may be under compression and the
fastener may be forcefully discharged while attempting
to free a jammed fastener.
When fastening electrical cables, make sure the
cables are not energized. Hold the tacker only by
insulated gripping surfaces. Use only fasteners
designed for electrical cable installations. Inspect that
the fastener has not damaged the insulation of the
electrical cables. A fastener that damages the
insulation of electric cables can lead to electric shock
and fire hazards.
2.2 SPECIFIC SAFETY RULES
1.Hold tool by insulated gripping surfaces when
performing an operation where the tool may
contact hidden wiring or its own cord. Contact
with a live wire will also make exposed metal parts
of the tool live and can shock the operator.
2. Know your power tool. Read operator's manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
tool. Following this rule may reduce the risk of
electric shock, fire, or serious injury.
3. Always wear safety glasses with side shields.
Everyday glasses are NOT safety glasses.
Following this rule may reduce the risk of eye injury.
4. Protect your hearing. Wear hearing protection
during extended periods of operation. Following this
rule may reduce the risk of serious personal injury.
5. Protect your lungs. Wear a face or dust mask if
the operation is dusty. Following this rule may
reduce the risk of serious personal injury.
6. Do not abuse charger cord. Never carry tool by
charger cord. Never yank cord to disconnect it from
outlet. Keep charger cord away from heat, oil, sharp
edges, and moving parts. and sharp edges, and
moving parts.
7. Do not attempt to alter the tool. Your Arrow
cordless power tool has a tested cycling time. It is
designed to perform adequately at this rate. Any
unauthorized alteration and/or use could result in a
hazardous condition causing serious personal injury.
Unauthorized parts and/or tool modification
automatically voids warranty.
8. Use proper charging device. While charging, the
tool should always be supplied via a residual current
device with a rated residual current of 20 mA or less.
3. LAYOUT AND ITEMS SUPPLIED
3.1 Layout (Fig. 1)
1.ON/OFF Switch
2.Cable
3.Trigger
4.Indicator
5.Air vents
6.Contact safety
7.Staple exit
8.Quick release magazine
3.2 Items supplied
CARTON CONTENTS
• Power Tool
• Original safety and operating instructions
1. Carefully check to see that all of the above items are
supplied.
2. Inspect the product carefully to make sure no
breakage or damage occurred during shipping. If
you find damaged or missing parts, please contact
us at the first time.
NOTE: Do not discard the shipping carton and
packaging material until you are ready to use your new
power tool. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material
are not toys. Do not let children play with plastic bags,
foils or small parts. These items can be swallowed and
pose a suffocation risk!
4. TECHNICAL DATA
Power supply: ......................................120V~ 60 Hz 5A
Shot rate: ..............................................60-80shots/min
Staple length: ...............................1/4"- 9/16" (6-14mm)
Nail length: ................................................ 5/8" (15mm)
Protection class: ..................................................... II/
Weight: ...............................................................1.16Kg
6
Publicidad
