Toro Revolution 60V Manual De Instrucciones página 7

2. Align the battery connector and insert it into
the tool until it locks into the latch as shown in
Figure 5.
Note:
At any time, press the
battery-charge-indicator button on the
battery connector to display the current charge
(LED indicators).
Note:
The battery tether is only compatible
with handheld products, it cannot be used with
ground-engaging or walk-behind products (such
as snow removal tools or lawn mowers).
Removing the Tether
1. Press the latch button on the tool and remove
the battery connector from the tool
1. Latch button
2. Press the latch button on the backpack
connector and pull it up to separate the tether
from the backpack
Figure 5
(Figure
Figure 6
(Figure 7).
1. Latch button
g365352
6).
g365354
5
Figure 7
g365353