Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing the inhalator for use
Please note:
• Clean and disinfect the nebulizer kit and optional masks before using them
for the first time after purchase.
• If the device has not been used for a long period of time, please clean and
disinfect the nebulizer kit and optional masks before using them.
• To prevent the risk of cross infection, different persons should never use the
same nebulizer kit.
1. At normal use, place the device on a stable, sturdy and flat surface horizon-
tally, so that the unit can be easily reached when you are seated.
2. Caution: place the device at least 10cm distance from walls.
3. Insert the power plug into the electrical outlet.
4. Rotate the inhalation top counterclockwise to remove the inhalation top from
the medication tank.
5. Add the correct amount of prescribed medication to the medication tank.
6. Turn the inhalation top clockwise until securely closed.
7. Attach the desired inhalation accessory.
Attaching the air tube
1. Push the air plug on one end of the air tube onto the air connector on the
upside of the compressor.
2. Push the air plug on the other end of the air tube onto the air tube connector
on the bottom of the nebulizer kit.
3. Plug the nebulizer kit into the holder on the device.
29
EN
Publicidad
