Publicidad
Idiomas disponibles
Idiomas disponibles
13. Heating with ambient temperature
setpoint or surface temperature
setpoint
This towel warmer allows to choose two operating modes:
•
Heating with "Ambient temperature setpoint": In this
mode, ambient temperature control is implemented with
a limitation of the product surface temperature.
•
Heating with "Surface temperature setpoint": In this
mode, surface temperature control is implemented with
a limitation of ambient temperature.
The default mode is Heating with ambient temperature setpoint.
•
Mode setting:
Press the Mode key on the
remote control for 5 sec
The information screen is
displayed
Shortly press the Mode key
on the remote control twice
The information screen is
displayed
COnF upon first pressure
USEr upon second
pressure
Confirm by pressing OK key
for 10 sec
The information screen is
displayed
Press
and
keys at
the
same
time
for
10
seconds
Code 1910000000356 - nv02
Switching on/
standby mode
Connection -
manual heating
start
14. Operating modes
Before performing any setting procedure, make sure the
keyboard is unlocked.
14.1 Access/Standby mode
When the device is in standby mode, 2 lines are shown on the
remote control display. To quit the standby mode, press the
standby button (refer to the instruction manual of the device).
14.2 Selection of the operating mode
The
programming to your needs, depending on the season, whether
the house is occupied or not. Select the desired mode by
pressing the
- 27 -
The Pro screen (advanced
installer
settings)
is
displayed
Press OK to confirm
The information screen is
displayed CtrL flashes
The AMB tP information
screen is displayed
Press - or + buttons to
switch between modes
Press the Mode button 3
times to confirm and quit
button allows to adapt the device operation
button one or more times.
English
= Advanced installer
settings
2
1
Publicidad
