14.7 Energy consumption
The indicator is displayed in Auto, Comfort, Eco and Frost
Protection modes, regardless of the temperature level
heating with ambient
C - Red
temperature setpoint >22°C
increased
heating with superficial
consumption
temperature setpoint >60°C
19°C< heating with ambient
B - Orange
temperature setpoint ≤22°C
medium
40°C< heating with superficial
consumption
temperature setpoint >60°C
heating with ambient
A - Green
temperature setpoint ≤19°C
lower consumption
heating with superficial
temperature setpoint <40°C
•
Displaying the estimated energy consumption in
KWh
To view this estimate, from Auto, Comfort, Eco or Frost
Protection mode, press
mode: press any button, the device automatically returns to the
previously active mode.
•
Resetting the energy meter
To reset the energy meter from Auto, Comfort, Eco or Frost
Protection mode, proceed as follows:
•
Press
•
Press simultaneously
5 seconds
To exit the energy meter reset, press any button, the device
automatically returns to the previous active mode.
14.8 Locking / Unlocking
•
Keypad lock
To lock the keypad, press the
them for 10 seconds. The padlock symbol
keypad is locked.
•
Keypad unlock
To unlock the keypad, press the
them for 10 seconds. The padlock symbol
keypad is unlocked.
Code 1910000000358 - nv02
Ambient
Superficial
temperature
temperature
control
control
. To exit the consumption display
and
for more than
and
buttons and hold
is displayed. The
and
buttons and hold
is displayed. The
14.9 Date/Time Setting
From Auto, Comfort, Eco or
Frost Protection mode, press
for 5 seconds. The cursor
moves to the day to be set and
Time mode.
The two digits of hour flash.
Select the time by pressing
and
. Save by pressing
The two digits of minutes flash.
Select the time by pressing
and
. Save by pressing
The cursor flashes on number 1
(representing Monday). Select
the date by pressing
. Save by pressing
1.
Monday
2.
Tuesday
3.
Wednesday
4.
Thursday
To change and/or assign a program press
To exit the day and time setting mode, press
14.10 Program overview
→
Comfort
Eco
The default control setting is non-stop Comfort for 7 days a week.
Comfort: the device operates in Comfort mode 24 hours a day, for
each selected day.
Eco: the device operates 24 hours a day in Eco mode.
Note: temperature lowering parameters can be set, see user settings.
P1: the device operates in Comfort mode for 1 time interval, e.g. from
6 am to 10 pm (and in Eco mode from 10 pm to 6 am).
P2: the device operates in Comfort mode for 2 time intervals,
- 29 -
5 sec
1
1
and
1
5.
Friday
6.
Saturday
7.
Sunday
3 times
→
→
→
P1
P2
English
2
2
2
P3