Publicidad
Idiomas disponibles
Idiomas disponibles
7 THE CONTROL PANEL
1
9
8
2
3
2.1
1. On/Off Button
2. Program Selection Button
2.1. Program Indicators
3. Delay Button
3.1. Delay Indicator
4. Remaining Time Indicator
5. Tablet Button
5.1. Tablet Indicator
6. Half Load Button
6.1. Half Load Indicator
7. Start/Pause Button
8. Rinse Aid Indicator
9. Salt Indicator
10. Washing Step Indicators
a- Washing Step Indicator
b- Rinse Step Indicator
c- Drying Step Indicator
d- End Step Indicator
1. On/Off Button
Switch the machine on by pressing the
On/Off button.
2. Program Selection Button
Select a suitable programme by pressing
Program Selection button. The selected
program indicator (2.1) will be on. For the
details of the programs refer to section
Program Table.
3. Delay Button
You can delay the start time of the
programme for 1-2...24 hours by pressing
the Delay button before the programme
starts. To activate the delay time, press
Start/Pause button (7). The delay indicator
(3.1) will be on. If you want to change the
delay time, first press the Start/Pause
4
10
7
6.1 3.1 5.1
button (7) and then the delay button to
select a new delay time. To activate the
new delay time, press the Start/Pause
button (7) again. To cancel the delay, you
need to switch to 0 hour by pressing the
Delay button.
6
5
If you switch off the machine after selecting
and activating the delay time, the delayed
time is cancelled.
4. Remaining Time Indicator
Programme flow can be monitored via the
Wash, Rinse, Dry, End indicators (10) and
Remaining Time Indicator.
5. Tablet Button
Press the Tablet button to activate the
Tablet option when using combined
detergent that contains salt and rinse aid.
Tablet indicator (5.1) will be on.
6. Half Load Button
Thanks to the half load function in your
machine, you can shorten the durations of
the programmes that you have selected
and reduce the energy and water
consumption by using half load electricity
and water.
Half Load indicator (6.1) will be on.
7. Start/Pause Button
Press the Start/Pause button to start the
selected programme. The wash led turns
on and the Remaining Time Indicator
shows the programme duration. It also
indicates the remaining time during the
programme flow. If you open the door of
your machine when the programme is
running the duration of the programme
pauses, and related washing step indicator
blinks.
8. Rinse Aid Indicator
When the rinse aid level is low, the rinse
aid lack warning indicator turns on and you
should fill the rinse aid chamber.
EN - 22
Publicidad
