Publicidad
Idiomas disponibles
Idiomas disponibles
9. Salt Indicator
When there is insufficient softening salt, the
salt lack warning indicator turns on and you
should fill up the salt chamber.
10. Washing Step Indicators
You can monitor the programme flow with
the Washing Step Indicators on the control
panel. While the Dry indicator is on, the
machine remains silent for about 15-50
minutes with respect to the flow of the
program you have selected.
•
Wash
•
Rinse
•
Dry
•
End
NOTE: Child lock is activated/deacti-
vated by pressing the Tablet button (5) for
about 3 seconds. When it is activated, all
leds blink and "CL" is shown on the
Remaining Time Indicator (4) once. When it
is deactivated, all leds and "CL" blink twice.
NOTE: To save any program as
favourite program, press Program (2) and
Delay (3) buttons at the same time. To
select favou rite program, press Program (2)
button for 3 seconds.
NOTE: If an extra option has been
used on the latest washing programme, this
option will remain active on the newly sele-
cted programme until the machine turns off.
To cancel this option on the newly selected
wash programme, press the related option
button.
7.1 Changing a Programme
If you would like to change the programme
when the machine is already running.
After the programme stops, select
your desired programme by pressing
Program Selection button.
7.2 Cancelling a Programme
If you would like to cancel a programme
when it is running.
EN - 23
Press the Start/Pause
button.
Start newly selected programme by
pressing the Start/Pause button.
The new programme will resume
the course of the old programme.
Press the Start/Pause button
for 3 seconds.
During cancellation, the Dry led is
on. The machine discharges the
water inside it in about 30 seconds.
Publicidad
