Publicidad
Idiomas disponibles
Idiomas disponibles
When the End led turns on,
switch your machine off by
pressing the On/Off button.
7.3 Switching the Machine Off
Switch your machine off with On/Off button after
the programme has ended and the End led turns
on. Pull the plug out of the outlet. Turn off the
water tap.
NOTE:
Do not open the door before the
programme ends.
NOTE: At the end of the washing
programme, you can leave the door of your
machine ajar to hasten the drying.
NOTE: If the door of the machine is
opened or power is cut off during washing,
the programme will continue when the door
is closed or the power is restored.
Buzzer Sound Control
(Model Depending)
To change the buzzer sound level, follow
the below steps:
1. Open the door and press Half Load (6)
and Tablet (5) buttons at the same time for
3 seconds.
2. When sound setting is recognized,
buzzer gives a long sound and machine will
display last set level, from "S0" to "S3".
3. To decrease sound level press Tablet
button (5). To increase sound level, press
Half Load button (6).
4. To save the selected sound level, turn off
the machine.
''S0'' level means all voices are off. Factory
setting is "S3".
Save Power Mode
To activate or deactivate save power mode,
follow the below steps:
1. Open the door and press Program (2)
and Half Load (6) buttons at the same time
for 3 seconds.
2. After 3 seconds, the machine will display
last Setting, "IL1" or "IL0".
3. When Save Power Mode is activated,
"IL1" will be displayed. On this mode,
interior lights (if avaliable) will turn off 2
minutes after the door is opened, and
the machine will turn off automatically 15
minutes after any intervention in order to
save energy.
4. When Save Power Mode is deactivated
"IL0" will be displayed. If Save Power Mode
is deactive, interior lights will be on as long
as the door is open, and the machine will
always be on unless it is turned off by user.
5. To save the selected setting, turn off the
machine.
In factory setting, Save Power Mode is
active.
EN - 24
Publicidad
