Descargar Imprimir esta página

Suncast BMPS6400 Instrucciones De Armado página 3

Ocultar thumbs Ver también para BMPS6400:

Publicidad

Before You Begin
• Read instructions thoroughly prior to assembly.
This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence.
• Please follow instructions.
Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly.
• Check for all parts before you begin assembly.
Using the provided parts check list, verify that you have all the parts required to construct your
cabinets.
• Assistance is required during parts of the assembly.
Caution
• This item uses self-tapping screws in some areas. There are no pre-drilled holes in the plastic.
Use force when starting to drive the screw. Once the screw pierces the plastic it will drive easier
Where parts are placed upside down, place on a smooth flat surface to avoid scratching finish.
• Not intended for storage of flammable or caustic chemicals.
• Not intended for usage by children.
• To avoid risk of suffocation, do not allow children to play inside container.
• This product may become susceptible to impact damage in freezing temperatures.
• Do not store near excessive heat.
• Exercise caution when moving fully loaded product. This product is not intended for transporting
heavy objects. Use as a stationary storage device only.
• Do not sit or stand on top.
• Do not store items on top.
• Max load 75 lbs. per shelf.
IMPORTANT: All tabs should be engaged before locking panels together.
Care and Cleaning
Your product is made of materials that will withstand outdoor use. Exposure to the elements (such as dust,
plant and animal life, moisture and sunlight) encourages moss, algae, and mold to grow on outdoor items.
To maintain the look of your product, we recommend cleaning it each year with mild soap and water. Do
Not use bleach, ammonia, or other caustic cleaners, and Do Not use stiff bristle brushes. Failure to perform
annual cleaning could result in permanent staining of the plastic. This is not a manufacturing defect and is
not covered under warranty.
3

Publicidad

loading