SantaFe ULTRA Serie Instrucciones De Instalación página 7

5
ATTACHING DUCT COLLARS
1. Outdoor Air Ventilation Duct
Outdoor air ventilation is optional. If setting up the unit to provide outdoor air ventilation, see page 10.
2. Return Air Inlet
An 8" diameter duct collar is attached to the unit.
3. Supply Air Outlet
An 8" diameter duct collar is attached to the unit. The back panel of the dehumidifier can be rotated to allow for
horizontal flow through or vertical flow through of the supply air.
a. Horizontal Flow Through
The unit ships configured for a horizontal flow through.
b. Vertical Flow Through
Remove the exhaust panel using a T20 torx bit. Rotate the panel so the exhaust collar is located on the top
of the unit. Align screw holes and snap the panel onto the base. Secure the supply panel to the base by
replacing the six screws.
Horizontal Flow Through
Horizontal Flow Through
(End Discharge)
(End Discharge)
A
Air Flow
A
Air Flow
8" Return Air Inlet
A
A 8" Return Air Inlet
8" Supply Air Outlet
B
8" Supply Air Outlet
B
Front View
Front View
A
A
800.533.7533 | Santa-Fe-Products.com
B
B
Rear View
Rear View
B
B
Vertical Flow Through
Vertical Flow Through
(Top Discharge)
(Top Discharge)
A Air Flow
A
Air Flow
8" Return Air Inlet
A
A 8" Return Air Inlet
8" Supply Air Outlet
B
8" Supply Air Outlet
B
Front View
Front View
Top View
Top View
A
A
Santa Fe ULTRA70 Installation & Operation Instructions
B
B
Rear View
Rear View
B
B
7