The victim icons are located on the bottom left of your
screen. The "+" icon indicates that there are more than three
burials.
3.2.2/ STEP 2: COARSE SEARCH
As soon as you receive a signal, place the device in the palm
of your hand, parallel to the slope, and pointing in the di-
rection indicated on the screen. Pay close attention to the
distance and the direction indicated on screen. For the initial
signal received (the strongest signal), the first avalanche
victim icon appears on screen, and once locked in, the icon
will start to blink. The victims are ranked by signal strength,
from strongest to weakest. So the victim corresponding to
the strongest signal will blink on your screen. If you come
close to another burial during your search, the icon corre-
sponding to this victim will also start to blink.
A
If you are not heading in the right direc-
tion, an alarm will sound and "u-turn" icon
will appear on screen indicating that you
should turnaround to head in the correct
direction towards the victim(s) burial zone.
In a complex situation where there are
multiple burials or in an environment where there is a lot
of interference, the device might reach analysis overload.
In this case, distance yourself from that specific area and
then return by following another direction.
EN
B
11