Barrette VINYL PANEL FOR DECORATIVE SCREEN PANEL INSERT Manual De Instrucciones página 4

3.
Set posts upright and measure distance between
posts. The distance between the inside post to
inside post is 49
4.
Install the first infill board by sliding the board
between the attached U-channels so that the
tongue is facing up (Fig 4).
NOTE:
It is critical that the tongue is up when installing
infill board.
5.
Make sure the bottom of the board is flush to the
bottom of the post channel (Fig 5). Place screws
into the bottom post channel through the infill
board (Fig 6).
4
⁄ " (Fig 3).
5
8
Fig. 3
Fig. 4
Fig. 5
Fig. 6