BaByliss PRO 4rtists FXX3TBE Manual De Instrucciones página 7

Maintenance of the blade
Always apply oil to the blades
before and after use. This will
ensure maximum
performance
maintenance. Hold the trimmer
away from your body in a
downward position and apply a
drop of lubricating oil on the front
and sides of the cutter blade. Wipe
off excess oil with a soft, dry cloth.
Do not pull, twist, or wrap the
supply cord around the appliance.
BLADE CARE
Because the trimmer blades are
precision-made for a very special
use, they should always be handled
with care and cleaned regularly to
ensure maximum performance.
Each time you finish using the
trimmer, take the cleaning brush
provided and brush away any
loose hair that has collected in the
blades. Use a clean cloth to dry the
attachment, reattach and then
store the trimmer to protect the
blades until the next use.
This product is for commercial use.
cutting
and proper
HOW TO ADJUST/ZERO GAP
YOUR BLADE
1. Turn unit off.
2. Using a small Allen wrench
loosen the 2 adjustment screws
shown at right.
3. Once the 2 adjustment screws
are loose, you will be able to
move the cutting blade up and
down.
4. Adjust the cutting blade to the
desired position and tighten the
2 screws. TIP: FOR BEST RESULTS,
MAKE SURE
BLADE AND STATIONARY BLADE
ARE PARALLEL.
5. Turn the unit on and make sure
the blade is moving properly.
CAUTION: PLEASE BE SURE THAT
THE CUTTING BLADE DOES NOT
EXTEND PAST THE STATIONARY
BLADE. THIS INCREASES THE
POTENTIAL
SCRATCHING THE SKIN.
7
THE CUTTING
OF CUTTING/