LaserLiner MultiWet-Finder Plus Manual De Instrucciones página 18

4
Wet/dry LED display
In addition to the numerical display of the measured value in % relative material
moisture, the LED display provides an additional visual evaluation of the moisture.
Fixed material characteristics are stored for cement screed, anhydrite screed and
concrete. In INDEX mode, you can set an individual threshold value. The LED
display bar becomes larger, from left to right, with increasing moisture content.
The 12-position LED display is subdivided into 4 green (dry), 3 yellow (moist) and
5 red (wet) segments. Wet material causes an additional acoustic signal.
Green = dry
The classification "dry" means that materials in a heated room have
!
reached a balanced moisture level and are thus suitable for further
processing.
5
Selecting the material
MENU
REF
MAX
CAL
Hold
down
There are three material groups: cement screed, anhydrite screed, and
concrete in CM % or mass % The most recently used material is retained
with each restart.
Cement Anhydrite
screed
Mass %
18
EN
Yellow = moist
C
C
CM
CM
CM
INDEX
Material groups
Concrete
screed
Mass %
Mass %
C
MENU
C
REF
CM
MAX
CM
CAL
CM
INDEX
Cement Anhydrite
screed screed
CM % CM %
Red = wet
Confirm
Concrete
Mass %