Rechner Sensors EasyTeach Manual De Instrucciones página 6

Ocultar thumbs Ver también para EasyTeach:

Idiomas disponibles

Table of contents

Important notes

First steps

General description

Mounting

Electrical connection

Installation of cables / Pin connection

EasyTeach chart / Switching function of the outputs

Operation of the sensor

Positioning and automatic self-adjustment

Mode of operation in the event of faults in the system

Maintenance, repair, disposal

Thank you,

For choosing a device from RECHNER Sensors. Since 1965 RECHNER Sensors has established a

global leadership position for capacitive sensors with commitment to product innovation, performance

and the highest quality.

Important Notes:

Please read this instruction manual carefully, paying full attention to all the connection details,

before powering up these devices for the first time. The use, servicing and operation of these

devices is only recommended for persons whom are familiar with this instruction manual plus

the current rules of safety in the work place including accident-prevention. Removal of the serial

number, changes to the units or improper use will lead to the loss of any guarantee. Graphical illustrations

may vary depending on the model type. Our sensors are not safety components, for example, in the sense

of the Machinery Directive 2006/42/EC. We recommend that the instruction manual be retained.

Symbols

Information: Additional note

Caution: Important note / safety note

Action required: An action or an adjustment is necessary

Follow these instructions for proper and safe use. Keep for future reference.

Before Installing

• Unpack the device and check that your delivery is complete, correct and that there is no

damage

• If there is any damage, please inform your supplier and those responsible for delivery

• If you have any questions or require support we are available to help you find a solution

All specifications are subject to change without notice.

Page