English
Emergency channels (9/19)
Press the EMG/SC [17] key to switch to channel 09. The EMG icon
appears on the screen.
Press the EMG/SC key again to switch to channel 19.
Press the EMG/SC key again to exit Emergency mode. The EMG icon
disappears from the screen.
Key lock
Long press the NRC/
key to activate the key lock function. The
icon
appears on the screen. When pressing any key you will hear
a warning beep and the icon
will blink. All radio's keys are locked,
except the PTT key.
Long press again the NRC/ key to disable the key lock function. The
icon
will disappear from the screen.
Channel scan
Long press the EMG/SC [17] key. The SC icon blinks on the screen.
The channel scanning starts immediately.
During scanning, you can press the ▲ or ▼ key to change the scanning
direction.
Long press the EMG/SC key or the PTT key to stop scanning. The SC
icon disappears from the screen.
High/Low power selection
Briefly press the HI/LO [6] key on the side of the CB radio to change
between high (4W) and low (1.5W) transmission power. The HI or LO
8