Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Remove Air Conditioner from Cabinet
NOTE: Remove any packaging material from cabinet
exterior.
□ Locate the two Front Panel screws and remove.
These screws will be needed to re-install the Front Panel
later.
□ Push metal cabinet side inward to release plastic tabs on
each side of Front Panel.
□ Remove Front Panel from the unit.
□ Remove shipping screws (A) from top of unit and
also on both sides by the base if installed.
A
9
□
Remove the air conditioner from cabinet carefully.
□ Add two EPDM foam seals (KK) to holes in top of
cabinet where shipping screws were removed from.
2
Attaching Top Rail and Side Rails
□ Attach top rail (FF) with flat side against cabinet as shown.
Insert four 1/4 inch screws (MM) from inside of cabinet
and secure to top rail.
□ From inside of cabinet insert three 1/4 inch screws (MM) to
attach each side rail (GG) as shown. Attach side rails with
flat side against cabinet.
KK
FF
MM
GG
Publicidad
