OHAUS PJX Serie Guia Del Usuario página 9

4. OPERATION
4.1 Overview of Display, Home Screen
Controls
CONTROL FUNCTIONS
Button
Primary
Function
• If the balance is
(Short
Off, turns on the
Press)
balance.
• If the balance is
On, sets zero.
Secondary
• Zeros the current
Function
value.
(Press and
• None
Hold)
(Extended
Press)
Menu
• Accepts the
Function
current (blinking)
(Short
setting on the
Press)
display.
Display
Net (NET)
Stability (*)
Negative (-)
Centre of Zero (>0<)
Preset tare (PT)
4.2 Principal Function
Zeroing: Press Zero to zero the balance.
With no load on the pan, press Zero to set the display to zero. Place an empty
Taring:
container on the pan and press Tare. Add objects to the container and its net
weight is displayed. After the container and the objects are removed, the tare
value will be displayed as a negative number. Press Tare to clear.
Weighing: First press Zero to set the display to zero. Place an object on the pan. The
display indicates the gross weight.
On / Zero
• Sends the current
displayed value to
the serial interface.
Off
• Changes weighing
units.
• None
Yes
• Rejects the current
(blinking) setting on
the display.
• Increments a value
being entered.
Print
• Operation is
dependent on the
application mode.
Unit
• Changes
application mode.
• None
No
• Reverts back to
previous menu
item.
• Decrements a
value being
entered.
Function
• Performs tare
operation.
Mode
• Enters the
main menu.
Calibration is
the first sub-
menu.
• Views the
preset Tare
value.
Back
• Immediately
exits the sub-
menu.
• Aborts a
calibration in
progress.
Result Field: depending
on application
Unit
EN-5
Tare
Menu-Cal
Exit