Publicidad
Idiomas disponibles
Idiomas disponibles
Do not flame under the extractor hood.
CAUTION: removable parts may become hot when
the appliance is in use.
Important! Disconnect the fuses before carrying out
installation and maintenance of the appliance.
The extractor hood must be installed in accordance
with the installation instructions detailed in this
manual.
A competent person or a qualified electrician should
carry out installation.
Pay attention to the sharp edges inside the extractor
hood, especially during installation and cleaning.
The minimum distances between the lowest part of
the hood and the stove used must be respected:
o Gas hobs: 75 cm
o Electric hobs : 65 cm
o Coal or oil kitchens: 75 cm
Make sure that the ducts are not bent, as this will
reduce the efficiency of the extractor hood.
Always place lids on pots and pans when cooking on
a gas hob.
When the hood is working, it is removing air from the
room. Please make sure that the room has proper
ventilation.
If the power cord is damaged, it must be replaced by
the manufacturer or qualified person. Never replace it
by yourself.
When the extractor hood is used in conjunction with a
gas appliance, e.g. a gas hob, the room must be
properly ventilated.
21
Publicidad
