Sennheiser IE 600 Instrucciones De Manejo página 12

English | IE 600
Specifications
dynamic, Extra Wide Band
Transducer principle
(XWB)
Transducer size 7 mm
Frequency response 4 to 46,500 Hz
Frequency
diffuse-field equalized
characteristic
Ear coupling in-ear, closed
Impedance 18 Ω
Sound pressure level 118 dB at 1 kHz, 1 Vrms
THD < 0.06 % (1 kHz, 94 dB)
Attenuation –26 dB
oxygen-free copper
cable (OFC), para-aramid
Cable
reinforced, ear hooks:
TPU-coated
gold-plated;
on the earphones: MMCX
Connectors
connectors
(see pin assign-
on the device: stereo jack
ment on inside cover
plugs
page)
3.5 m m, unbalanced, 3-pin
4.4 mm, balanced, 5-pin
approx. 6 g per ear canal
Weight
phone (without cable)
Operating
–10 °C to +55 °C
temperature
Maximum value of
the static magnetic 1.6 mT
field at the surface
8
Manufacturer declarations
For more information on regulatory compliance
markings, see the inside back cover.
Warranty
Sennheiser electronic GmbH & Co. KG gives
a warranty of 24 months on this product. For
the current warranty conditions, please visit
our website at www.sennheiser.com or con-
tact your Sennheiser partner. The Australia
and New Zealand Warranty Conditions can be
found on the inside back cover.
In compliance with the following requirements
• General Product Safety Directive (2001/95/EC)
Compliant to Sound Pressure Limits ac-
cording to country specific requirements.
EU declaration of conformity
• RoHS Directive (2011/65/EU)
The full text of the EU declaration of
conformity is available at the following Internet
address: www.sennheiser.com/download.
UK declaration of conformity
• RoHS Regulations (2012)
Notes on disposal
• EU: WEEE Directive (2012/19/EU)
• UK: WEEE Regulations (2013)
The symbol of the crossed-out
dumpster on the product, the (re-
chargeable) battery (if applicable)
and/or the packaging indicates
that these products must not be disposed of
with normal household waste, but must be dis-
posed of separately at the end of their service
life. For the packaging, follow the regulations in
your country for separating waste. Improper dis-
posal of packaging materials can be harmful to
your health and the environment.
The separate collection of waste electrical
and electronic equipment, (rechargeable) bat-
teries (if applicable) and packaging is intended
to promote reuse and recycling and to pre-
vent negative impacts on public health and the
environment, for example due to hazardous sub-
stances contained in these products. At the end
of their service life, recycle electrical and elec-
tronic equipment and (rechargeable) batteries so
that their materials can be reused and to prevent
environmental pollution.
If (rechargeable) batteries can be removed
without destroying them, you are obliged to
dispose of them separately (see the product's
operating instructions for information on how
to remove the batteries safely). Be especially
careful when handling (rechargeable) batteries
containing lithium, as these pose special haz-
ards, such as the risk of fire and/or health risks
if button cells are swallowed. Reduce battery
waste as much as possible by using longer-life
batteries or rechargeable batteries.
Further information on the recycling of these
products can be obtained from your municipal
administration, from the municipal collection
points, or from your Sennheiser partner. You may
also be able to return electrical or electronic
equipment to your distributor, if they are legally
required to do so. By disposing of your batteries
properly, you are helping to protect public health
and the environment.