CycloVac HD Serie Manual De Instrucciones página 12

Collector – no filter, no bag
for a normal use, we recommend a regular maintenance of your dust canister, to
ensure the maximum performance of your system.
1. to empty the collector dust receptacle, disconnect the HD unit from its
power source.
2. release the two clamps, remove the dust canister, and empty it (figure 13a).
3. If the guard screen (wire netting) looks blocked, clean it with a scrubbing
brush (figure 13b).
4. put the dust canister back in place and seal by latching both clips.
12
figure 13a
troubleshooting
figure 13B