Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
ProbleM
Decrease in suction
strength
14
PossIble cause
Dirt recipient/Bag is full
Dirt recipient is not
properly attached
filters need cleaning /
replacing (if applicable)
open vacuum inlet
exhaust line is clogged
Guard screen (wire netting)
of the collector (no filter,
no bag) is blocked.
troubleshooting
correctIve actIon
empty dirt recipient /
change bag.
check clamps and dirt
recipient are aligned.
remove, shake and/or
wash filters or replace
them (depending on
model) before reinstalling
them in the unit.
close all vacuum inlets
not in use.
Verify that no object is
blocking the exhaust.
check the guard screen
for blockage. If it is
blocked, clean it with
a scrubbing brush.
Publicidad
