Descargar Imprimir esta página

CycloVac HD Serie Manual De Instrucciones página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

General Information
your vacuum cleaning system is designed to collect everyday dry matter (dust).
It is approved by authorized testing agencies for dry use only. Do not use on wet
surfaces.
Should you accidentally vacuum liquids, immediately unplug the HD unit from the
electric outlet, then empty and wipe the collector dust recipient with a dry cloth.
then operate the system from the vacuum inlet through which you vacuumed the
liquid, in order to eliminate all moisture in the piping system.
We strongly recommend against vacuuming abrasive materials such as cement,
plaster and gyproc dust. this fine dust could cause considerable damage. Should
you do so inadvertently, immediately clean the filters (if applicable) and, as a
precautionary measure, contact your authorized service center to determine the
extent of the damage to the unit.
Remember that in order for your warranty to remain valid, maintenance of the
motor and repairs to the unit itself must be carried out by an authorized service
center, using original Cyclo Vac or trovac parts.
troubleshooting
13

Publicidad

loading