BH FITNESS G6300 Manual De Instrucciones página 9

EMERGENCY STOP.-
For the user's maximum safety, this unit
is equipped with a safety key (g) and a
STOP button. The safety key (g) must
be slotted into its housing (E), Fig.2,
otherwise the machine will not start.
When you are using the machine
always clip the cord on the safety key to
your clothing. Tugging on the cord will
pull the safety key out of its slot and the
machine will stop immediately. To
restart the machine simply put the key
back into the key slot.
Remove the safety key (g) whenever
the machine is not being used and keep
it out of children's reach. Pressing the
red button marked STOP will also stop
the unit immediately. To restart it, press
the button marked
again.
PULSE MEASUREMENT.-
Your pulse rate is measured by
placing both hands on pulse sensors
(R) with which the electronic unitis
equipped. The pulse rate readout will
appear after a few seconds.
IMPORTANT: This is not a medical
appliance and therefore the heart rate
shown is merely
purposes.
START/PAUSE
for guideline
LUBRICATION
FUNCTION.-
This machine has a built-in lubrication
warning. After running a distance of
300 km, the monitor will display OIL.
This means that your machine needs
lubrication.
indicated in the LUBRICATION section
and then press any key for 6 seconds.
This will clear the warning and reset
the distance until the next lubrication.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual).
THE MANUFACTURER RESERVES
THE RIGHT
SPECIFICATIONS
PRODUCTS
NOTICE.
9
REMIND
Lubricate the
TO MODIFY
OF
WITHOUT
belt as
THE
ITS
PRIOR