Publicidad
Idiomas disponibles
Idiomas disponibles
3.2.2.6.2 Wi-Fi Connection
If you are using an ethernet connection and do not wish to use Wi-Fi, simply click the "Next"
button.
Scan AP(1): Wi-Fi-network currently available for connection is displayed in 2.
SSID(2): Enter the name of the Wi-Fi-network to connect(You can enter it
manually without going through 1.).
Password: Enter the password of the Wi-Fi-network to connect.
When internet connection is successful, click the "Next" button.
* In case the WLAN connection is unstable, enhance the signal by using a WLAN repeater.
Continent : Select your continent
Time Zone: Hour: Select your time zone.
RMD Power Save Timer: OFF(default)
RMD Operation Mode: Normal Mode(default)
Server Use: Choose whether the cloud server (external internet) will be used.
IoT Hub Connection String: Enter the unique string provided to you in order to access the
Azure IoT Hub (cloud server).
The string format is as follows:
HostName=emashub.azure-devices.net;DeviceId=XXXX;SharedAccessKey=OOOO=
* For more information on how to obtain strings, refer to Section 3.2.1.2 Obtaining IoT Hub
String.
Server Connection Check: Check the server connection.
Battery Status: Check if the product has diagnosed any issues.
When the server connection is complete, click the "Next" button.
17
Disable Wi-Fi in the same way that you connected Wi-Fi in Section
Connection
When the server connection is complete, click the "Complete" button.
3.2.2.10 Connect to RESU Monitor to Check Product Registration
After product installation via RMD is complete, check if the product has been registered on the
server by selecting "RESU Monitor" below. (https://resu.lgensol.com)
When you log-in, you can check
the product registration as shown
in the picture.
Disconnect Wi-Fi
Publicidad
