IKEA VAPPEBY Serie Manual De Instrucciones página 11

Getting started
Connect a USB-C cable to the input port and the other
end to a power source (a computer or a power supply) to
charge your product before the first use and whenever
the LED is flashing red to indicate a low battery. When
charging, the LED light will remain solid red if the
speaker is off and will turn off when the battery is fully
charged.
Recommended power supply:
5.0 VDC, 1.0 A (Not included)
Speaker functions
Turning On/Off
Press and hold the Power button (1) to turn your
speaker On/Off.
Play/Pause
A short press on the Power button will play or pause
music.
Auto-off
If the speaker is not paired to any device, it will turn off
automatically after 5 minutes. If the speaker is paired
but no music is playing, it will turn off automatically
after 20 minutes.
Bluetooth pairing
To pair your speaker to a source device, the speaker
must be in Bluetooth pairing mode. To pair, open the
Bluetooth setting on your source device and connect to
"VAPPEBY Portable".
11