Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
While operating, the device can reach high temperatures. To avoid burns and accidents, do not use the
device if it is malfunctioning, and do not use non-original spare parts.
ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The device must be unpacked
and fully checked before connection by a professional.
5.2 Use
WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The device must be completely removed from its packaging. All guards must be fully
withdrawn.
Place the device on a solid, flat surface.
Never place the device on a flammable surface.
Do not install this device near open fires or other heating devices.
USE
Insert the power cord into the device and plug it in.
Once plugged in, the red light comes on.
Turn the temperature adjustment knob. The green light comes on. The temperature can be between 40° and
90°C.
Once the desired temperature is reached, the green light goes out.
When the temperature decreases, the device starts heating again and the green light turns on again.
At the end of service, turn the thermostat to 0 and unplug the appliance.
REMARK
The appliance is equipped with a safety system in case of overheating. In the event of tripping, unplug the
appliance and allow it to cool. If this protection system activates regularly, it is essential to contact your
retailer.
After automatic shutdown, the device can only be put into operation by pressing the Reset button on the back
of the device. To do this, wait for the temperature to drop, press the Reset button.
EN
Publicidad
