Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The product is intended for light trimming of shrubs
and lawn edges in domestic use.
ASSEMBLY AND OPERATION
ACTION
ASSEMBLY (Fitting/Changing the blade)
Removing the blade
WARNING: Wear gloves when
changing the blade.
Fitting the blade
BEFORE OPERATION
Checking the battery condition (for
WG801 WG801.1)
Charging the battery pack
More details can be found in
charger's manual
Installing the battery pack
10
10
Removing the battery pack
OPERATION
Starting& Stopping
Trimming grass (for WG801, WG801.9)
NOTE: Keep the tool away from hard
objects and delicate plants.To make a
closer cut, slightly tilt the tool.
Trimming hedges and shrubs
NOTE: Take care to avoid any foreign
objects. Especially avoid hard objects
such as metal wire and railings, as
these could damage the blades.
20V Cordless Shrub Shear & Grass Shear
MAINTENANCE
NOTE: To ensure long and reliable service, carry out
the following maintenance regularly.
Remove the battery before carrying out any
adjustment, servicing or maintenance.
Check for obvious defects such as loose, dislodged
or damaged blade, loose fixings and worn or
damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
FIGURE
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
The recommended ambient temperature range for
See Fig.
the charging system during charging is 0
A1, A2
BLADE MAINTENANCE
Always clean the cutting blades after operation and
See Fig.
periodically lubricating the cutting blade.
B1, B2
Visually check the condition of the cutting edges of
the cutting blade.
Ensure that the blade is covered with the blade guard
supplied when not in use.
See Fig. C1
CLEANING/STORAGE
Clean the exterior of the machine thoroughly using
See Fig. C2
a soft brush and cloth. Do not use water, solvents
or polishes. Remove all debris, especially from the
ventilation slots.
See Fig. C3
Store the machine in a secure dry place out of reach
See Fig. C4
of children. Do not place other objects on top of the
machine.
See Fig. D
See Fig. E
See Fig. F
C-45
C.
o
o
C-40
C.
o
o
EN
Publicidad
