HyperX Cloud Stinger Core Guia De Inicio Rapido página 4

ENGLISH
Overview
A - Swivel to mute microphone
B - Status LED
C - Power button
D - Volume wheel
E - USB charge port
F - USB adapter
G - Wireless pairing pin hole
H - Wireless status LED
I - USB charge cable
J -
DTS Instruction Card
Using the Headset
1. Connect the wireless USB adapter to your device.
2. Power on the headset.
3. Follow the instructions on the DTS instruction card to enable DTS®
Headphone;X®.
Status LED
HEADSET STATUS
Pairing
Searching
Connected
Power Button
Power on/o – Hold power button for 3 seconds
Volume Wheel
Scroll up or down to adjust volume level.
Swivel to Mute Microphone
Charging
It is recommended to fully charge your headset before rst use.
LED
Flashing green and red every 0.2s
Slow breathing green
90% – 100% battery: Solid green
15% – 90% battery: Blinking green
< 15% battery: Blinking red
CHARGE STATUS
Fully charged
15% – 99% battery
< 15% battery
Questions or Setup Issues?
Contact the HyperX support team at:
hyperxgaming.com/support/headsets
WARNING: Permanent hearing damage can occur if a headset is used at
high volumes for extended periods of time.
LED
Solid green
Breathing green
Breathing red