DJI D6000i Guía De Usuario página 10

Stopping the Generator
1. Turn off all connected electric devices.
2. Move the engine switch to the OFF position and the generator will stop running.
3. Disconnect all connected electric devices.
4. Turn the fuel valve to the OFF position.
Storage and Maintenance
Storage
Follow the steps below for storage if the generator will not be used for
more than 30 days.
1. Before storage, start the generator and let it run for five to ten
minutes to warm up. Next, stop the generator to drain the engine oil.
2. Take down the engine oil drain hose and rotate the cap
counterclockwise to open. Wait for the oil to drain completely.
To avoid scalding, DO NOT touch hot engine oil.
3. Install and secure the engine oil drain hose back in place. Rotate the
cap clockwise to tighten it.
4. Turn the fuel valve to the OFF position. Remove the fuel drain bolt on
the bottom of the fuel tank, drain the fuel with a funnel, and store the
fuel in a dedicated container to avoid gum formation. Install the fuel
drain bolt back in place after the fuel is completely drained. Clean the
funnel and wipe it with dry cloth before storage.
5. Turn the fuel valve to the ON position. Use a screwdriver to loosen
the carburetor fuel drain bolt, and drain the fuel inside the carburetor
through the pipe connected to the carburetor. Store the fuel in a
dedicated container to avoid gum formation. Tighten the carburetor
fuel drain bolt, and turn the fuel valve to the OFF position.
6. Place the generator in a cool, dry, and clean place.
Transportation
The generator especially its exhaust system can become very hot during running. To avoid scalding or fire of
flammable materials, if the generator has been running, wait for at least 15 minutes to let it cool down before
moving it into a transportation vehicle. Make sure the generator is stable during transportation and the fuel valve
is in the OFF position to avoid spilling.
Maintenance
Scan the QR code on the fuel tank to view the tutorial videos or refer to the labels and stickers on the generator
for maintenance instructions.
Check and maintain the generator regularly to keep it in good condition.
Maintenance Safety Notes
• Before maintaining, stop the generator, disconnect all the electric devices and batteries, and let the
generator cool down completely.
Fuel Tank Fuel Drain Bolt
Carburetor Fuel Drain Bolt
9