Publicidad
Idiomas disponibles
Idiomas disponibles
en
6 Operation
Fig.45
MENU
OPTIONS
BOOKING AND SCHEDULE
HMI CONFIG
FOR SERVICEMAN
HELP
OK
Fig.46
HMI CONFIG
CLOCK
DATE
12-HOUR CLOCK
FAHRENHEIT
0.5°C STEP
KEEP LIGHT
BUZZER
CHILD LOCK
CHILD LOCK TIME
OK
Tab.34
Menu
CLOCK
DATE
12-HOUR CLOCK
FAHRENHEIT
0.5°C STEP
KEEP BACKLIGHT
BUZZER
SCREEN LOCK
SCREEN LOCK TIME
6.6
Accessing serviceman menu
54
BACK
BACK
Setting
Set the time with MENU/OK.
Set the date with MENU/OK.
Toggle between 12-hour and 24-hour clock with
Toggle between Celcius (°C) and Fahrenheit (°F) degrees with
Set the temperature increase by 0.5°C or 1°C with
Activate/deactivate the permanent light of the screen with
Switch the sound of button on or off with
Activate/deactivate the screen lock with
When this mode is activated, unlock the wired controller by pressing BACK during 5 seconds.
When SCREEN LOCK is active, define the screen lock activation delay with MENU/OK and
.
2. Select HMI CONFIG and press MENU/OK.
3. Select the option with
each option.
or
or
.
or
.
Some parameters, which may affect the operation of the appliance, are
protected by an access code. Only the serviceman is authorized to modify
these parameters.
1. Press MENU/OK.
2. Select FOR SERVICEMAN and press MENU/OK.
3. Input the correct password (factory setting: 1234) and press
MENU/OK to enter the service page.
4. Perform the required settings.
or
. Refer to table below to configure
.
or
.
or
.
or
.
7802133 - v01 - 21072022
and
Publicidad
