Publicidad
Idiomas disponibles
Idiomas disponibles
PLACING THE PORTA-FILTER
a. Position porta-filter underneath the brew head.
b. Position handle so that the handle lines up with the open lock icon "
the unit and fits into the groove.
c. Then, slowly turn it to the right until the handle is aligned with the closed
lock symbol " " on the unit.
CAUTION: Ensure you do not accidentally press a drinks button.
b.
a.
PLACING THE CUP(S)
a. Adjust the height by inserting the removable drip grid in the height-
adjusting slot if you are using a small "demitasse" cup(s) to brew espresso.
b. Keep the removable drip grid on top of the removable drip tray if you are
using a larger cup to brew cappuccino or latte.
a.
b.
IMPORTANT: When brewing cappuccino or latte, please make sure to adjust
the frothing tube lever in order to position the frothed milk dispensing tube to
point inside the cup that is being used.
TURNING THE UNIT ON
a. Make sure unit is plugged into the appropriate electrical outlet.
b. Turn unit on "I" using the on/off "I/O" switch located on the right side on the
unit.
a.
12
BVMC-ECM-PMPAT_22ESM2 (US).indd 12-13
BVMC-ECM-PMPAT_22ESM2 (US).indd 12-13
" on
c.
c.
b.
The control panel progress bar will illuminate (Espresso heater and Steam
heater " ") during the heating process and until the water and milk (if
preparing cappuccino or latte) reach the perfect temperature. Once the
progress bar is a fully illuminated and a solid light, the unit is ready to use.
SELECT THE FUNCTION
PREPARING ESPRESSO
a. Press the Espresso Button "
" once to brew a single shot. The indicator
symbol (1) will illuminate for a single shot of espresso. The progress bar will
indicate a single shot of espresso is brewing.
b. Press the Espresso Button "
" twice to brew a double shot or two single
shots of espresso. The indicator symbol (2) will illuminate for a double shot
of espresso. the progress bar will indicate a double shot of espresso is
brewing. For both Automatic Espresso functions, the unit will start brewing
the espresso according to your selection. The unit will stop automatically
after the brewing process and the progress bar will fully illuminate in a solid
light, indicating that the cycle has been completed. Your delicious espresso is
ready to be enjoyed!
NOTE: If you would like to brew less coffee than the preset serving, press
the function button at any time during the brewing process to stop when the
desired amount of coffee is reached.
c. For manual espresso, press the Manual Espresso Button "
brewing. When you have the desired amount of espresso, press the Manual
Espresso button once again to stop the machine.
a.
b.
x1 x1
PREPARING CAPPUCCINO
Prior to preparing your cappuccino, adjust the level of frothed milk according
to your preference by turning the Froth Control Knob to the right for more foam
(cappuccino) and to the left for less foam (latte).
MORE FOAM
" once to begin
c.
x2 x2
LESS FOAM
2022/4/8 9:31 AM
2022/4/8 9:31 AM
13
Publicidad
