Publicidad
Idiomas disponibles
Idiomas disponibles
5 Intended use
The battery is intended to provide energy to the appliances and equipment in a motorhome. The battery is intended
to be used with 12 V electrical systems. The control unit optimizes the operation of the battery in a motorhome. The
display provides information about the operation of the system.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor in-
stallation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
6 Target group
The electrical power supply must be connected by a qualified electrician who has demonstrated skill and
knowledge related to the construction and operation of electrical equipment and installations, and who
is familiar with the applicable regulations of the country in which the equipment is to be installed and/or
used, and has received safety training to identify and avoid the hazards involved.
7 Technical description
• The battery is manufactured with Lithium (LiFePO4) technology and employing high density power (HDS) cells.
The battery is featuring an internal battery management system (BMS) to automatically regulate the charge in-
put to the battery. The BMS monitors voltage, current, resistance and temperature and uses this information to
keep the cells balanced, preventing internal imbalances in the battery by protecting it from: overvoltage, un-
dervoltage, short circuit, overtemperature and overcharging.
• The control unit provides protection for the battery by constantly monitoring charge, discharge and SOC cur-
rents and will also charge the starter battery when possible.
• The LCD display provides information, such as the charging status, the voltage of the batteries and the charg-
ing or discharging current.
8 Installation
Battery installation
WARNING! Damage hazard
When working around a battery, do not allow tools to bridge the battery terminals or short circuit any part
of the battery.
EN
13
Publicidad
