Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
System functions
Using System Functions
02
1. Tap and hold
for 3 seconds.
2. Turn the Navigation dial and select the desired system function, and then tap
3. Tap
to change the selected function's settings or start the function.
NOTE
• To return to the main screen, tap
• If you do not manipulate the control panel for 7 seconds after entering the System Functions menu, the
display returns to the main screen.
AI Pattern
This function saves your frequently used cycles and settings.
1. Tap and hold
for 3 seconds.
2. Turn the Navigation dial to select AI Pattern, and then tap
3. Tap to select On or Off.
-
The default setting is On. Set it to Off if you do not want to use this function.
-
When you turn the function on, the dryer remembers frequently used cycles and their settings (Dry
Level
, Time
-
When you turn off the function, all the saved data resets.
Alarm
You can enable/disable alarm sounds.
1. Tap and hold
for 3 seconds.
2. Turn the Navigation dial to select Alarm, and then tap
3. Tap
to select On or Off.
-
The default setting is On.
NOTE
The setting remains unchanged even if you restart the dryer.
36
English
Untitled-2 36
02
AI Patten
again or turn the Navigation dial to select Back and tap
) and save them in frequently used order.
Off
Tap O to set alert
03
.
.
01
*
* Tap and hold 3 seconds.
.
.
8/11/2020 3:36:03 PM
Publicidad
