Publicidad
Idiomas disponibles
Idiomas disponibles
GB
a) Only switch on the tool when
hands, feet and all other
body parts are at a secure
distance to the tool. Risk of
injury from cuts.
b) Take care that you do not in-
jure your hands and feet with
the cutting elements.
c) Remove the power supply
unit before working with the
equipment. Do not use ex-
tension cables. The power
supply unit is to be used
only in enclosed spaces. Wa-
ter entry increases the risk of
electric shock.
d) Do not use the shrub cutter
in combination with the tel-
escopic shaft. There is a risk
of cut wounds.
e) The tool is designed to trim
hedges. Do not use the tool
to cut branches, hard wood
or other. To avoid damaging
the equipment.
f) Do not attempt to dislodge
a blocked/trapped blade be-
fore switching the tool off.
There is a risk of injury.
g) Always switch off the tool and
remove the battery (if applica-
ble)
- if you leave the tool unsu-
pervised
- before removing jams
- before control- maintenance-
or cleaning tasks
- if you have come into con-
tact with a foreign object
- whenever the machine starts
to vibrate uncontrollably
How to avoid accidents and in-
juries.
64
All manuals and user guides at all-guides.com
Charging process
Ensure that the equipment is
charged for no longer than
3-5 hours without interruption.
The battery and equipment could
be damaged and they consume
energy unnecessarily in case of
longer charging time. Overcharg-
ing invalidates the guarantee.
1.
The safety key (7) must be du-
ring the loading process plug.
2. Connect the charger cable plug
(17) with the charger socket on
the tool (5).
3. Connect the power supply unit
(16) to a socket.
The charging indicator (6) lights
up:
Red: Equipment charging.
Green: Charging finished.
The recommended charging
time is max. 3 – 5 hours.
4. After the recharging process
is completed, first unplug the
charger from the wall outlet, and
then remove the charger cable
plug from the tool.
Operation
Keep to noise abatement regula-
tions and other by-laws.
Switching on and off
1. Remove the blade guard (11/14)
before switching the unit on.
2. Insert the safety key (7) into the
device.
3. To switch on, hold the switch
lock (2) depressed and operate
the on/off switch (8). Then re-
lease the switch lock.
Publicidad
