Connection Diagram - ITV ICE MAKERS ALFA NDP55 Manual Del Usuario

USER MANUAL NG
The NG machines with air-cooler condenser take the air through the front section, and drive it off through the lateral,
back and also front louvers due to their new oblique condenser structure and placement.
Do not place anything over the maker or in facing the front louver.
In case the front louver is not enough, the exit is either total or partially obstructed or due to its placement it will receive
hot air from another device, we recommend, in case it is not possible to change the location of the machine, to install
a water condenser unit.
IT IS IMPORTANT THAT THE WATER PIPING DO NOT PASS BY OR NEAR SOURCES OF HEAT IN ORDER NOT TO LOSE ICE
PRODUCTION.
MINIMUM DISTANCE TO OBSTACLES
Side View
>75cm / >29"
* There's no minimum distance to obstacles in the sides of the machine

CONNECTION DIAGRAM

Thread the support legs to the base of the machine in the housing set to such end and regulate the height as
to have the equipment perfectly leveled.
>10cm / >4"
>10cm / >4"
>10cm
>4"
Plug
Socket
Tap
Water connection hose
Discharge hose
4