Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
15. Storing the Snow Blower
CAUTION
Ensure that all melted snow that may drip from the
snow blower is properly wiped up to prevent a slip
and fall hazard.
• Remove the battery pack(s) and store in a
secure location out of the reach of children.
NOTE: When not in use, the battery pack(s)
should be stored in an enclosed area where the
temperature will not drop below 32°F (0°C). Optimal
charging temperature range is
41°F - 104°F (5°C - 40°C).
Before storage, wipe any moisture, dirt, or debris
from the battery compartment area.
• Wipe the snow blower with a clean dry cloth.
• Check all nuts, bolts, knobs, screws, etc., for
tightness.
• Inspect moving parts for damage, breakage,
and wear. Have any damaged or missing parts
repaired or replaced.
• Fold the handlebar assembly to the storage
position (Fig. 15a):
a. Turn the chute-rotation handle (F) to the right to
rotate the chute (K) to the right (clockwise).
b. Loosen the handlebar lock knobs (H) on both
sides and rotate the handlebar assembly (E) to
the storage position.
c. Tighten the lock knobs (H) to secure the
handlebar in place.
d. Turn the chute-rotation handle (F) to the middle
to rotate the chute (K) to the middle (Fig. 15b).
e. Pull out the chute-rotation handle from the hole
of the guide seat.
f.
Insert the chute-rotation handle (F) into the
storage clip (I) (Fig. 15c).
• Store the snow blower in a clean, dry, enclosed
place out of the reach of children.
• Do not store near corrosive materials such as
fertilizer or rock salt.
15a
H
F
15b
H
F
15c
H
23
K
E
I
K
E
F
K
F
E
I
Publicidad
