Hotpoint GA2 124 IX HA Guía Rápida página 4

TROUBLESHOOTING
Problem
The oven or the burner will
not switch on.
In the event of problems, turn the adjustment knob back to the
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website
• Using QR Code
• Alternatively,
contacting our After-sales Service, please state the codes provided on your product's identification
plate.
Possible cause
Power cut.
Disconnection from the mains electricity.
Gas supply interrupted.
Switch-on procedure carried out incorrectly.
docs . hotpoint . eu
contact our After-sales Service
Solution
Check for the presence of mains electrical power and whether
the oven is connected to the electricity supply.
Wait at least one minute, then try to switch the oven on again
and see if the problem persists.
Check that the gas tap upstream of the oven is open or that the
liquid gas cylinder (if being used) is not empty.
Wait at least one minute and then repeat the steps described in
the "Daily use" section.
position and open the oven door.
(See phone number in the warranty booklet). When
Model: xxxXXXXxx XXXXXXXXXXXXXX