Other Functions; Cleaning And Conservation; Warranty Conditions - SOLAC CVG9700 Instrucciones De Uso

BOOKCVG9700.book Page 13 Friday, April 16, 2010 3:19 PM
1 Turn the temperature selector (3) to
2 Press the medium (5) or maximum button (6) once.
,
The possibility of ironing with steam at a low temperature allows you to iron a large number of
garments without having to increase the working temperature, with the resulting energy saving.
VERTICAL IRONING
It enables you to remove creases from delicate garments without having to lay them on the
ironing board: jackets, coats, curtains, suede garments, etc.
1 Place the garment on a hanger, away from other garments, persons...
2 Select the desired ironing temperature with the temperature selector (3), stand the
CVG upright and press either of the two steam buttons (5 or 6).
,
At Position (••) you will obtain a more humid visible steam which will be easier to see,
whereas at Position (•••) and (MAX) the steam is drier and, although the same flow is
maintained, will be less visible.
FILLING WITH WATER
If while ironing the tank runs out of water, the three luminous indicators will start to flicker at
a frequency of 1 second.
1 Switch off the CVG, keep it upright and fill the tank using the beaker (8) provided.
)
Dry the CVG with a dry cloth if any of the water spills out of the tank.
)
If the appliance were to run out of water completely with the steam selector activated,
you would hear a strange noise from the micro-pump. Switch off the steam selector to
prevent any damage to the system. Switch off the appliance and fill the water tank.
When switching it on again, this noise will disappear.

OTHER FUNCTIONS

ANTICALC SYSTEM
The CVG is fitted with an innovative anticalc system consisting of a resin filter, which retains the limy
substances in the water, preventing these from reaching the steam chamber in the soleplate and
thereby extending the life of your CVG. The existence of this anticalc system does not mean you can
ignore the advice on water hardness mentioned in the "BEFORE STARTING TO IRON" section.

CLEANING AND CONSERVATION

SOLE-PLATE
1 Unplug the iron and let it cool down.
,
Use environment-friendly clay-based products to clean the sole-plate.
OUTSIDE
1 To clean the outside of your CVG, use a cloth moistened in soapy water.
,
Do not clean with abrasive chemical products or solvents as it may attack certain plastic
parts and / or remove some of the marks and / or indications.
2 Store your CVG in the vertical position, wind the cord round the heel and secure it with the clip.
,
Although the power cord is fitted with a 360º rotational elbow, NEVER FORCE
this cord when winding it around the appliance on the first turn.

WARRANTY CONDITIONS

• Solac accepts no liability for faults in your appliance in the event of noncompliance with
the specifications of the warranty conditions or failure to follow the operating or
maintenance directions included in the instruction brochure for every appliance.
• The warranty conditions may be found in the accompanying "World-Wide Guarantee" booklet.
• We remind you that the damage caused by the effects of scale is not covered by
the guarantee.
OTHER FUNCTIONS
Position
en
13